▷ CCNA1 v7 ITN | Modules 16 - 17 Exam Answers

CCNA1 v7 Modules 16 - 17 Exam Answers

Summary

Check answers here: CCNA1 v7 ITN Modules 16 – 17: Building and Securing a Small Network Exam Answers. CCNA 200-301 Passed 100% !!

This exam will cover material from Modules 16- 17 Network Application Communications of the CCNA1 – Introduction to Networks v7.0 (ITN) curriculum. This exam will be scored using the Weighted Model where each MCSA (Multiple-Choice Single-Answer) is worth two points and each MCMA (Multiple-Choice Multiple-Answer) is worth one point for each correct option. Other tasks types such as fill-in-the-blank, drag and drop (matching) and Packet Tracer items may be included in this exam. For Packet Tracer tasks, you must have the latest version of Packet Tracer installed on your machine.

This exam will cover material from Modules 16 – 17 of the CCNA1 – Introduction to Networks v7.0 (ITN) curriculum.

This exam will be scored using the Weighted Model where each MCSA (Multiple-Choice Single-Answer) is worth two points and each MCMA (Multiple-Choice Multiple-Answer) is worth one point for each correct option. If more options are selected than required, the student will receive a score of zero.

CCNA1 v7 Building and Securing a Small Network Exam Answers

A small company has only one router as the exit point to its ISP. Which solution could be adopted to maintain connectivity if the router itself, or its connection to the ISP, fails?

Activate another router interface that is connected to the ISP, so the traffic can flow through it.

Purchase a second least-cost link from another ISP to connect to this router.

Add more interfaces to the router that is connected to the internal network.

Have a second router that is connected to another ISP.

Correct! Wrong!

A network technician issues the C:\> tracert -6 www.cisco.com command on a Windows PC. What is the purpose of the -6 command option?

It forces the trace to use IPv6.

It limits the trace to only 6 hops.

It sets a 6 milliseconds timeout for each replay.

It sends 6 probes within each TTL time period.

Correct! Wrong!

A network engineer is analyzing reports from a recently performed network baseline. Which situation would depict a possible latency issue?

a change in the amount of RAM according to the show version output

a next-hop timeout from a traceroute

a change in the bandwidth according to the show interfaces output

an increase in host-to-host ping response times

Correct! Wrong!

What mechanism can be implemented in a small network to help minimize network latency for real-time streaming applications?

PoE

ICMP

AAA

QoS

Correct! Wrong!

What factor should be considered in the design of a small network when devices are being chosen?

cost of devices

ISP

redundancy

traffic analysis

Correct! Wrong!

Some routers and switches in a wiring closet malfunctioned after an air conditioning unit failed. What type of threat does this situation describe?

configuration

environmental

maintenance

electrical

Correct! Wrong!

An administrator decides to use "12345678!" as the password on a newly installed router. Which statement applies to the password choice?

It is strong because it uses a minimum of 10 numbers, letters and special characters.

It is weak since it is a word that is easily found in the dictionary.

It is weak because it uses a series of numbers or letters.

It is strong because it uses a passphrase.

Correct! Wrong!

An administrator is troubleshooting connectivity issues and needs to determine the IP address of a website. What is the best command to use to accomplish the task?

show ipv6 interface

nslookup

copy startup-config running-config

show ipv6 route

Correct! Wrong!

Only employees connected to IPv6 interfaces are having difficulty connecting to remote networks. The analyst wants to verify that IPv6 routing has been enabled. What is the best command to use to accomplish the task?

show ip nat translations

show interfaces

copy running-config startup-config

show running-config

Correct! Wrong!

What three configuration steps must be performed to implement SSH access to a router? (Choose three.)

Please select 3 correct answers

an encrypted password

a password on the console line

an IP domain name

an enable mode password

a unique hostname

a user account

Correct! Wrong!

Which command should be used on a Cisco router or switch to allow log messages to be displayed on remotely connected sessions using Telnet or SSH?

debug all

terminal monitor

logging synchronous

show running-config

Correct! Wrong!

A user is redesigning a network for a small company and wants to ensure security at a reasonable price. The user deploys a new application-aware firewall with intrusion detection capabilities on the ISP connection. The user installs a second firewall to separate the company network from the public network. Additionally, the user installs an IPS on the internal network of the company. What approach is the user implementing?

layered

structured

risk based

attack based

Correct! Wrong!

Which example of malicious code would be classified as a Trojan horse?

malware that requires manual user intervention to spread between systems

malware that can automatically spread from one system to another by exploiting a vulnerability in the target

malware that was written to look like a video game

malware that attaches itself to a legitimate program and spreads to other programs when launched

Correct! Wrong!

Which three services are provided by the AAA framework? (Choose three.)

Please select 3 correct answers

autobalancing

authorization

automation

authentication

accounting

autoconfiguration

Correct! Wrong!

What is considered the most effective way to mitigate a worm attack?

Ensure that AAA is configured in the network.

Ensure that all systems have the most current virus definitions.

Download security updates from the operating system vendor and patch all vulnerable systems.

Change system passwords every 30 days.

Correct! Wrong!

Which benefit does SSH offer over Telnet for remotely managing a router?

encryption

authorization

connections via multiple VTY lines

TCP usage

Correct! Wrong!

Which attack involves a compromise of data that occurs between two end points?

extraction of security parameters

denial-of-service

username enumeration

man-in-the-middle attack

Correct! Wrong!

An administrator decides to use "RobErT" as the password on a newly installed router. Which statement applies to the password choice?

It is strong because it uses a minimum of 10 numbers, letters and special characters.

It is strong because it uses a passphrase.

It is strong because it contains 10 numbers and special characters.

It is weak since it uses easily found personal information.

Correct! Wrong!

An administrator decides to use "password" as the password on a newly installed router. Which statement applies to the password choice?

It is weak since it is a word that is easily found in the dictionary.

It is strong because it uses a minimum of 10 numbers, letters and special characters.

It is weak because it is a commonly used password.

It is strong because it uses a passphrase.

Correct! Wrong!

Which network service automatically assigns IP addresses to devices on the network?

DHCP

DNS

Telnet

traceroute

Correct! Wrong!

A network technician is troubleshooting an issue and needs to verify the IP addresses of all interfaces on a router. What is the best command to use to accomplish the task?

nslookup

ipconfig getifaddr en0

show ip route

show ip interface brief

Correct! Wrong!

Which malicious code attack is self-contained and tries to exploit a specific vulnerability in a system being attacked?

virus

worm

social engineering

Trojan horse

Correct! Wrong!

For security reasons a network administrator needs to ensure that local computers cannot ping each other. Which settings can accomplish this task?

smartcard settings

MAC address settings

file system settings

firewall settings

Correct! Wrong!

What is the difference between a virus and a worm?

Viruses hide in legitimate programs but worms do not.

Viruses self-replicate but worms do not.

Worms require a host file but viruses do not.

Worms self-replicate but viruses do not.

Correct! Wrong!

A network administrator establishes a connection to a switch via SSH. What characteristic uniquely describes the SSH connection?

on-site access to a switch through the use of a directly connected PC and a console cable

direct access to the switch through the use of a terminal emulation program

remote access to the switch through the use of a telephone dialup connection

out-of-band access to a switch through the use of a virtual terminal with password authentication

remote access to a switch where data is encrypted during the session

Correct! Wrong!

What information about a Cisco router can be verified using the show version command?

the routing protocol version that is enabled

the value of the configuration register

the administrative distance used to reach networks

the operational status of serial interfaces

Correct! Wrong!

Which component is designed to protect against unauthorized communications to and from a computer?

port scanner

antivirus

firewall

security center

antimalware

Correct! Wrong!

A ping fails when performed from router R1 to directly connected router R2. The network administrator then proceeds to issue the show cdp neighbors command. Why would the network administrator issue this command if the ping failed between the two routers?

The network administrator wants to verify the IP address configured on router R2.

The network administrator wants to determine if connectivity can be established from a non-directly connected network.

The network administrator suspects a virus because the ping command did not work.

The network administrator wants to verify Layer 2 connectivity.

Correct! Wrong!

A network technician suspects that a particular network connection between two Cisco switches is having a duplex mismatch. Which command would the technician use to see the Layer 1 and Layer 2 details of a switch port?

show mac-address-table

show ip interface brief

show interfaces

show running-config

Correct! Wrong!

What is the objective of a network reconnaissance attack?

denying access to resources by legitimate users

disabling network systems or services

discovery and mapping of systems

unauthorized manipulation of data

Correct! Wrong!

A student wants to save a router configuration to NVRAM. What is the best command to use to accomplish the task?

show ip nat translations

show interfaces

show ip route

copy running-config startup-config

Correct! Wrong!

Which statement describes the ping and tracert commands?

Both ping and tracert can show results in a graphical display.

Ping shows whether the transmission is successful; tracert does not.

Tracert shows each hop, while ping shows a destination reply only.

Tracert uses IP addresses; ping does not.

Correct! Wrong!

Which two traffic types require delay sensitive delivery? (Choose two.)

Please select 2 correct answers

vídeo

voz

web

FTP

Correct! Wrong!

A user wants to know the IP address of the PC. What is the best command to use to accomplish the task?

show interfaces

ipconfig

show ip nat translations

copy running-config startup-config

Correct! Wrong!

Which statement is true about CDP on a Cisco device?

Because it runs at the data link layer, the CDP protocol can only be implemented in switches.

To disable CDP globally, the no cdp enable command in interface configuration mode must be used.

The show cdp neighbor detail command will reveal the IP address of a neighbor only if there is Layer 3 connectivity.

CDP can be disabled globally or on a specific interface.

Correct! Wrong!

Which type of attack involves an adversary attempting to gather information about a network to identify vulnerabilities?

DoS

dictionary

reconnaissance

man-in-the-middle

Correct! Wrong!

A network technician is investigating network connectivity from a PC to a remote host with the address 10.1.1.5. Which command, when issued on a Windows PC, will display the path to the remote host?

tracert 10.1.1.5

ping 10.1.1.5

trace 10.1.1.5

traceroute 10.1.1.5

Correct! Wrong!

An administrator decides to use "5$7*4#033!" as the password on a newly installed router. Which statement applies to the password choice?

It is weak because it is often the default password on new devices.

It is strong because it uses a minimum of 10 numbers, letters and special characters.

It is strong because it contains 10 numbers and special characters.

It is weak since it uses easily found personal information.

Correct! Wrong!

On which two interfaces or ports can security be improved by configuring executive timeouts? (Choose two.)

Please select 2 correct answers

loopback interfaces

serial interfaces

vty ports

Fast Ethernet interfaces

console ports

Correct! Wrong!

A newly hired network technician is given the task of ordering new hardware for a small business with a large growth forecast. Which primary factor should the technician be concerned with when choosing the new devices?

devices with support for modularity

devices that have support for network monitoring

devices with a fixed number and type of interfaces

redundant devices

Correct! Wrong!

Why would a network administrator use the tracert utility?

to identify where a packet was lost or delayed on a network

to check information about a DNS name in the DNS server

to determine the active TCP connections on a PC

to display the IP address, default gateway, and DNS server address for a PC

Correct! Wrong!

Where are Cisco IOS debug output messages sent by default?

Syslog server

memory buffers

console line

vty lines

Correct! Wrong!

Which process failed if a computer cannot access the internet and received an IP address of 169.254.142.5?

DNS

HTTP

DHCP

Correct! Wrong!

A technician is to document the current configurations of all network devices in a college, including those in off-site buildings. Which protocol would be best to use to securely access the network devices?

HTTP

FTP

SSH

Telnet

Correct! Wrong!

Which statement is true about Cisco IOS ping indicators?

'U' may indicate that a router along the path did not contain a route to the destination address and that the ping was unsuccessful.

'!' indicates that the ping was unsuccessful and that the device may have issues finding a DNS server.

'.' indicates that the ping was successful but the response time was longer than normal.

A combination of '.' and ‘!’ indicates that a router along the path did not have a route to the destination address and responded with an ICMP unreachable message.

Correct! Wrong!

Which network design consideration would be more important to a large corporation than to a small business?

low port density switch

redundancy

Internet router

firewall

Correct! Wrong!

What type of traffic would most likely have the highest priority through the network?

SNMP

FTP

instant messaging

voice

Correct! Wrong!

A network technician is troubleshooting an issue and needs to verify all of the IPv6 interface addresses on a router. What is the best command to use to accomplish the task?

show ipv6 interface

show interfaces

show ip route

show ip nat translations

Correct! Wrong!

What type of attack may involve the use of tools such as nslookup and fping?

access attack

reconnaissance attack

denial of service attack

worm attack

Correct! Wrong!

Which command can an administrator issue on a Cisco router to send debug messages to the vty lines?

terminal monitor

logging console

logging synchronous

logging buffered

Correct! Wrong!

Which command can an administrator execute to determine what interface a router will use to reach remote networks?

show arp

show ip route

show interfaces

show protocols

Correct! Wrong!

What is the role of an IPS?

detecting and blocking of attacks in real time

authenticating and validating traffic

filtering of nefarious websites

connecting global threat information to Cisco network security devices

Correct! Wrong!

When applied to a router, which command would help mitigate brute-force password attacks against the router?

service password-encryption

banner motd $Max failed logins = 5$

exec-timeout 30

Correct! Wrong!

An administrator decides to use “WhatAreyouwaiting4” as the password on a newly installed router. Which statement applies to the password choice?

It is weak since it uses easily found personal information.

It is weak because it is often the default password on new devices.

It is strong because it uses a passphrase.

It is weak since it is a word that is easily found in the dictionary.

Correct! Wrong!

When configuring SSH on a router to implement secure network management, a network engineer has issued the login local and transport input ssh line vty commands. What three additional configuration actions have to be performed to complete the SSH configuration? (Choose three.)

Please select 3 correct answers

Configure role-based CLI access.

Set the user privilege levels.

Configure the correct IP domain name.

Manually enable SSH after the RSA keys are generated.

Generate the asymmetric RSA keys.

Create a valid local username and password database.

Correct! Wrong!

A user reports a lack of network connectivity. The technician takes control of the user machine and attempts to ping other computers on the network and these pings fail. The technician pings the default gateway and that also fails. What can be determined for sure by the results of these tests?

The router that is attached to the same network as the workstation is down.

The NIC in the PC is bad.

Nothing can be determined for sure at this point.

The TCP/IP protocol is not enabled.

Correct! Wrong!

When should an administrator establish a network baseline?

when the traffic is at peak in the network

at regular intervals over a period of time

when there is a sudden drop in traffic

at the lowest point of traffic in the network

Correct! Wrong!

Students who are connected to the same switch are having slower than normal response times. The administrator suspects a duplex setting issue. What is the best command to use to accomplish the task?

copy running-config startup-config

show ip nat translations

show interfaces

ipconfig getifaddr en0

Correct! Wrong!

A network engineer is troubleshooting connectivity issues among interconnected Cisco routers and switches. Which command should the engineer use to find the IP address information, host name, and IOS version of neighboring network devices?

show interfaces

show cdp neighbors detail

show version

show ip route

Correct! Wrong!

An administrator decides to use “pR3s!d7n&0” as the password on a newly installed router. Which statement applies to the password choice?

It is strong because it uses a minimum of 10 numbers, letters and special characters.

It is weak because it is often the default password on new devices.

It is weak since it uses easily found personal information.

It is weak since it is a word that is easily found in the dictionary.

Correct! Wrong!

A support technician needs to know the IP address of the wireless interface on a MAC. What is the best command to use to accomplish the task?

show ip nat translations

ipconfig getifaddr en0

show interfaces

copy running-config startup-config

Correct! Wrong!

A user is unable to reach the website when typing http://www.cisco.com in a web browser, but can reach the same site by typing http://72.163.4.161. What is the issue?

DNS

default gateway

DHCP

TCP/IP protocol stack

Correct! Wrong!

What is the purpose of the network security accounting function?

to determine which resources a user can access

to require users to prove who they are

to provide challenge and response questions

to keep track of the actions of a user

Correct! Wrong!

What is the advantage of using SSH over Telnet?

SSH supports authentication for a connection request.

SSH operates faster than Telnet.

SSH is easier to use.

SSH provides secure communications to access hosts.

Correct! Wrong!

What does the term vulnerability mean?

a method of attack to exploit a target

a weakness that makes a target susceptible to an attack

a computer that contains sensitive information

a known target or victim machine

a potential threat that a hacker creates

Correct! Wrong!

A network administrator is upgrading a small business network to give high priority to real-time applications traffic. What two types of network services is the network administrator trying to accommodate? (Choose two.)

Please select 2 correct answers

SNMP

FTP

instant messaging

video

voice

Correct! Wrong!

Which element of scaling a network involves identifying the physical and logical topologies?

network documentation

cost analysis

traffic analysis

device inventory

Correct! Wrong!

What is an accurate description of redundancy?

configuring a switch with proper security to ensure that all traffic forwarded through an interface is filtered

designing a network to use multiple paths between switches to ensure there is no single point of failure

configuring a router with a complete MAC address database to ensure that all frames can be forwarded to the correct destination

designing a network to use multiple virtual devices to ensure that all traffic uses the best path through the internetwork

Correct! Wrong!

Which firewall feature is used to ensure that packets coming into a network are legitimate responses to requests initiated from internal hosts?

application filtering

stateful packet inspection

URL filtering

packet filtering

Correct! Wrong!

What feature of SSH makes it more secure than Telnet for a device management connection?

stronger password requirement

random one-time port connection

confidentiality with IPsec

Correct! Wrong!

Which method is used to send a ping message specifying the source address for the ping?

Issue the ping command without extended commands.

Issue the ping command after shutting down un-needed interfaces.

Issue the ping command without specifying a destination IP address.

Issue the ping command from within interface configuration mode.

Correct! Wrong!

A teacher is having difficulties connecting his PC to the classroom network. He needs to verify that a default gateway is configured correctly. What is the best command to use to accomplish the task?

copy running-config startup-config

show ip nat translations

ipconfig

show interfaces

Correct! Wrong!

By following a structured troubleshooting approach, a network administrator identified a network issue after a conversation with the user. What is the next step that the administrator should take?

Establish a theory of probable causes.

Verify full system functionality.

Establish a plan of action to resolve the issue.

Test the theory to determine cause.

Correct! Wrong!

An administrator decides to use “admin” as the password on a newly installed router. Which statement applies to the password choice?

It is strong because it uses a minimum of 10 numbers, letters and special characters.

It is strong because it uses a passphrase.

It is weak because it is often the default password on new devices.

It is strong because it contains 10 numbers and special characters.

Correct! Wrong!

Which command will block login attempts on RouterA for a period of 30 seconds if there are 2 failed login attempts within 10 seconds?

RouterA(config)# login block-for 30 attempts 10 within 2

RouterA(config)# login block-for 10 attempts 2 within 30

RouterA(config)# login block-for 30 attempts 2 within 10

RouterA(config)# login block-for 2 attempts 30 within 10

Correct! Wrong!

Users are complaining that they are unable to browse certain websites on the Internet. An administrator can successfully ping a web server via its IP address, but cannot browse to the domain name of the website. Which troubleshooting tool would be most useful in determining where the problem is?

nslookup

tracert

netstat

ipconfig

Correct! Wrong!

An employee complains that a Windows PC cannot connect to the Internet. A network technician issues the ipconfig command on the PC and is shown an IP address of 169.254.10.3. Which two conclusions can be drawn? (Choose two.)

Please select 2 correct answers

The DNS server address is misconfigured.

The enterprise network is misconfigured for dynamic routing.

The PC cannot contact a DHCP server.

The PC is configured to obtain an IP address automatically.

The default gateway address is not configured.

Correct! Wrong!

Which type of network threat is intended to prevent authorized users from accessing resources?

access attacks

DoS attacks

trust exploitation

reconnaissance attacks

Correct! Wrong!

What is the purpose of a small company using a protocol analyzer utility to capture network traffic on the network segments where the company is considering a network upgrade?

to establish a baseline for security analysis after the network is upgraded

to identify the source and destination of local network traffic

to capture the Internet connection bandwidth requirement

to document and analyze network traffic requirements on each network segment

Correct! Wrong!

An administrator decides to use "Feb121978" as the password on a newly installed router. Which statement applies to the password choice?

It is weak since it is a word that is easily found in the dictionary.

It is weak because it uses easily found personal information.

It is strong because it uses a passphrase.

It is strong because it uses a minimum of 10 numbers, letters and special characters.

Correct! Wrong!

An administrator decides to use "Elizabeth" as the password on a newly installed router. Which statement applies to the password choice?

It is strong because it uses a passphrase.

It is strong because it uses a minimum of 10 numbers, letters and special characters.

It is weak because it uses easily found personal information.

It is weak since it is a word that is easily found in the dictionary.

Correct! Wrong!

What is one of the most effective security tools available for protecting users from external threats?

patch servers

password encryption techniques

firewalls

router that run AAA services

Correct! Wrong!

ITN | Modules 16 – 17

Final Score

Congratulations, you have completed the CCNA1 v7 – ITN – Modules 16 – 17! Tell us your rating!

4 Comments

DST says:

December 10, 2020 at 12:35 pm

Thanks for the online test. A remark though: would be excellent if after all answers, there would be a % total. 😉

1. yzylr says:
  
  December 13, 2020 at 7:57 pm
  
  Thanks for the suggestion, it will be added in the next week 🙂
  
Joe Darvish says:

December 3, 2023 at 12:34 pm

Where are the answers, man?

1. yzylr says:
  
  February 8, 2024 at 1:38 pm
  
  The answers are there

CCNA3 v7 ENSA | Final Exam Answers

CCNA3 v7 ENSA | Modules 13 – 14 Exam Answers

CCNA3 v7 ENSA | Modules 9 – 12 Exam Answers

CCNA1 v7 ITN | Modules 16 – 17 Exam Answers

CCNA1 v7 Modules 16 - 17 Exam Answers

CCNA1 v7 Building and Securing a Small Network Exam Answers

A small company has only one router as the exit point to its ISP. Which solution could be adopted to maintain connectivity if the router itself, or its connection to the ISP, fails?

A network technician issues the C:\> tracert -6 www.cisco.com command on a Windows PC. What is the purpose of the -6 command option?

A network engineer is analyzing reports from a recently performed network baseline. Which situation would depict a possible latency issue?

What mechanism can be implemented in a small network to help minimize network latency for real-time streaming applications?

What factor should be considered in the design of a small network when devices are being chosen?

Some routers and switches in a wiring closet malfunctioned after an air conditioning unit failed. What type of threat does this situation describe?

An administrator decides to use "12345678!" as the password on a newly installed router. Which statement applies to the password choice?

An administrator is troubleshooting connectivity issues and needs to determine the IP address of a website. What is the best command to use to accomplish the task?

Only employees connected to IPv6 interfaces are having difficulty connecting to remote networks. The analyst wants to verify that IPv6 routing has been enabled. What is the best command to use to accomplish the task?

What three configuration steps must be performed to implement SSH access to a router? (Choose three.)

Which command should be used on a Cisco router or switch to allow log messages to be displayed on remotely connected sessions using Telnet or SSH?

Which example of malicious code would be classified as a Trojan horse?

Which three services are provided by the AAA framework? (Choose three.)

What is considered the most effective way to mitigate a worm attack?

Which benefit does SSH offer over Telnet for remotely managing a router?

Which attack involves a compromise of data that occurs between two end points?

An administrator decides to use "RobErT" as the password on a newly installed router. Which statement applies to the password choice?

An administrator decides to use "password" as the password on a newly installed router. Which statement applies to the password choice?

Which network service automatically assigns IP addresses to devices on the network?

A network technician is troubleshooting an issue and needs to verify the IP addresses of all interfaces on a router. What is the best command to use to accomplish the task?

Which malicious code attack is self-contained and tries to exploit a specific vulnerability in a system being attacked?

For security reasons a network administrator needs to ensure that local computers cannot ping each other. Which settings can accomplish this task?

What is the difference between a virus and a worm?

A network administrator establishes a connection to a switch via SSH. What characteristic uniquely describes the SSH connection?

What information about a Cisco router can be verified using the show version command?

Which component is designed to protect against unauthorized communications to and from a computer?

A ping fails when performed from router R1 to directly connected router R2. The network administrator then proceeds to issue the show cdp neighbors command. Why would the network administrator issue this command if the ping failed between the two routers?

A network technician suspects that a particular network connection between two Cisco switches is having a duplex mismatch. Which command would the technician use to see the Layer 1 and Layer 2 details of a switch port?

What is the objective of a network reconnaissance attack?

A student wants to save a router configuration to NVRAM. What is the best command to use to accomplish the task?

Which statement describes the ping and tracert commands?

Which two traffic types require delay sensitive delivery? (Choose two.)

A user wants to know the IP address of the PC. What is the best command to use to accomplish the task?

Which statement is true about CDP on a Cisco device?​

Which type of attack involves an adversary attempting to gather information about a network to identify vulnerabilities?

A network technician is investigating network connectivity from a PC to a remote host with the address 10.1.1.5. Which command, when issued on a Windows PC, will display the path to the remote host?

An administrator decides to use "5$7*4#033!" as the password on a newly installed router. Which statement applies to the password choice?

On which two interfaces or ports can security be improved by configuring executive timeouts? (Choose two.)

A newly hired network technician is given the task of ordering new hardware for a small business with a large growth forecast. Which primary factor should the technician be concerned with when choosing the new devices?

Why would a network administrator use the tracert utility?

Where are Cisco IOS debug output messages sent by default?

Which process failed if a computer cannot access the internet and received an IP address of 169.254.142.5?

A technician is to document the current configurations of all network devices in a college, including those in off-site buildings. Which protocol would be best to use to securely access the network devices?

Which statement is true about Cisco IOS ping indicators?​

Which network design consideration would be more important to a large corporation than to a small business?

What type of traffic would most likely have the highest priority through the network?

A network technician is troubleshooting an issue and needs to verify all of the IPv6 interface addresses on a router. What is the best command to use to accomplish the task?

What type of attack may involve the use of tools such as nslookup and fping?

Which command can an administrator issue on a Cisco router to send debug messages to the vty lines?

Which command can an administrator execute to determine what interface a router will use to reach remote networks?

What is the role of an IPS?

When applied to a router, which command would help mitigate brute-force password attacks against the router?

An administrator decides to use “WhatAreyouwaiting4” as the password on a newly installed router. Which statement applies to the password choice?

When configuring SSH on a router to implement secure network management, a network engineer has issued the login local and transport input ssh line vty commands. What three additional configuration actions have to be performed to complete the SSH configuration? (Choose three.)

A user reports a lack of network connectivity. The technician takes control of the user machine and attempts to ping other computers on the network and these pings fail. The technician pings the default gateway and that also fails. What can be determined for sure by the results of these tests?

When should an administrator establish a network baseline?

Students who are connected to the same switch are having slower than normal response times. The administrator suspects a duplex setting issue. What is the best command to use to accomplish the task?

A network engineer is troubleshooting connectivity issues among interconnected Cisco routers and switches. Which command should the engineer use to find the IP address information, host name, and IOS version of neighboring network devices?

An administrator decides to use “pR3s!d7n&0” as the password on a newly installed router. Which statement applies to the password choice?

A support technician needs to know the IP address of the wireless interface on a MAC. What is the best command to use to accomplish the task?

A user is unable to reach the website when typing ht​tp://ww​w.cisco.com in a web browser, but can reach the same site by typing ht​tp://72.163.4.161. What is the issue?

What is the purpose of the network security accounting function?

What is the advantage of using SSH over Telnet?

What does the term vulnerability mean?

A network administrator is upgrading a small business network to give high priority to real-time applications traffic. What two types of network services is the network administrator trying to accommodate? (Choose two.)

Which element of scaling a network involves identifying the physical and logical topologies?

What is an accurate description of redundancy?

Which firewall feature is used to ensure that packets coming into a network are legitimate responses to requests initiated from internal hosts?

What feature of SSH makes it more secure than Telnet for a device management connection?

Which method is used to send a ping message specifying the source address for the ping?

A teacher is having difficulties connecting his PC to the classroom network. He needs to verify that a default gateway is configured correctly. What is the best command to use to accomplish the task?

By following a structured troubleshooting approach, a network administrator identified a network issue after a conversation with the user. What is the next step that the administrator should take?

An administrator decides to use “admin” as the password on a newly installed router. Which statement applies to the password choice?

Which command will block login attempts on RouterA for a period of 30 seconds if there are 2 failed login attempts within 10 seconds?

Which statement is true about CDP on a Cisco device?

Which statement is true about Cisco IOS ping indicators?

A user is unable to reach the website when typing http://www.cisco.com in a web browser, but can reach the same site by typing http://72.163.4.161. What is the issue?