▷ CCNA2 v7 Modules 5 - 6: Exam Answers

CCNA2 v7 Modules 5 - 6 Exam Answers

Summary

Check answers here: CCNA2 v7 SRWE Modules 5 – 6: Switching Concepts, VLANs, and InterVLAN Routing Exam Answers. CCNA 200-301 Passed 100% !!

This exam will cover material from Modules 5 – 6 of the CCNA2 Switching, Routing, and Wireless Essentials v7.0 (SRWE) curriculum. This exam will be scored using the Weighted Model where each MCSA (Multiple-Choice Single-Answer) is worth two points and each MCMA (Multiple-Choice Multiple-Answer) is worth one point for each correct option. Other tasks types such as fill-in-the-blank, drag and drop (matching) and Packet Tracer items may be included in this exam. For Packet Tracer tasks, you must have the latest version of Packet Tracer installed on your machine.

This exam will cover material from Modules 5 – 6 of the CCNA2 Switching, Routing, and Wireless Essentials v7.0 (SRWE) curriculum.

This exam will be scored using the Weighted Model where each MCSA (Multiple-Choice Single-Answer) is worth two points and each MCMA (Multiple-Choice Multiple-Answer) is worth one point for each correct option. If more options are selected than required, the student will receive a score of zero.

CCNA2 v7 Redundant Networks Exam Answers

Which port role is assigned to the switch port that has the lowest cost to reach the root bridge?

non-designated port

root port

designated port

disabled port

Correct! Wrong!

A set of switches is being connected in a LAN topology. Which STP bridge priority value will make it least likely for the switch to be selected as the root?

4096

32768

61440

65535

Correct! Wrong!

What are two requirements to be able to configure an EtherChannel between two switches? (Choose two.)

Please select 2 correct answers

The interfaces that are involved need to be contiguous on the switch.

Different allowed ranges of VLANs must exist on each end.

All interfaces need to be assigned to different VLANs.

All the interfaces need to work at the same speed.

All the interfaces need to be working in the same duplex mode.

Correct! Wrong!

When EtherChannel is configured, which mode will force an interface into a port channel without exchanging aggregation protocol packets?

desirable

active

auto

Correct! Wrong!

In which two PVST+ port states are MAC addresses learned? (Choose two.)

Please select 2 correct answers

blocking

listening

forwarding

learning

disabled

Correct! Wrong!

In which two port states does a switch learn MAC addresses and process BPDUs in a PVST network? (Choose two.)

Please select 2 correct answers

learning

disabled

listening

forwarding

blocking

Correct! Wrong!

When a range of ports is being configured for EtherChannel, which mode will configure PAgP so that it initiates the EtherChannel negotiation?

active

passive

auto

desirable

Correct! Wrong!

When a range of ports is being configured for EtherChannel, which mode will configure LACP so that it initiates the EtherChannel negotiation?

passive

active

desirable

auto

Correct! Wrong!

Which spanning tree standard supports only one root bridge so that traffic from all VLANs flows over the same path?

802.1D

PVST+

MST

Rapid PVST

Correct! Wrong!

What are two advantages of using LACP? (Choose two.)

Please select 2 correct answers

LACP allows Fast Ethernet and Gigabit Ethernet interfaces to be mixed within a single EtherChannel.

It decreases the amount of configuration that is needed on a switch.

It allows directly connected switches to negotiate an EtherChannel link.

It allows the use of multivendor devices.

It provides a simulated environment for testing link aggregation.

It eliminates the need for configuring trunk interfaces when deploying VLANs on multiple switches.

Correct! Wrong!

A switch is configured to run STP. What term describes a field used to specify a VLAN ID?

MAC Address

port ID

bridge priority

extended system ID

Correct! Wrong!

Which two load balancing methods can be implemented with EtherChannel technology? (Choose two.)

Please select 2 correct answers

source IP to destination IP

destination MAC to destination IP

destination MAC to source MAC

destination IP to destination MAC

destination IP to source IP

source MAC to destination MAC

Correct! Wrong!

Which function is provided by EtherChannel?

spreading traffic across multiple physical WAN links

dividing the bandwidth of a single link into separate time slots

enabling traffic from multiple VLANs to travel over a single Layer 2 link

creating one logical link by using multiple physical links between two LAN switches

Correct! Wrong!

Which two mode combinations would result in the successful negotiation of an EtherChannel? (Choose two.)

Please select 2 correct answers

desirable; active

active; passive

active; on

passive; auto

desirable; desirable

auto; auto

Correct! Wrong!

What is the purpose of the Spanning Tree Protocol (STP)?

creates smaller broadcast domains

prevents routing loops on a router

allows Cisco devices to exchange routing table updates

prevents Layer 2 loops

creates smaller collision domains

Correct! Wrong!

Which protocol provides up to 16 instances of RSTP, combines many VLANs with the same physical and logical topology into a common RSTP instance, and provides support for PortFast, BPDU guard, BPDU filter, root guard, and loop guard?

MST

Rapid PVST+

PVST+

STP

Correct! Wrong!

Which two network design features require Spanning Tree Protocol (STP) to ensure correct network operation? (Choose two.)

Please select 2 correct answers

redundant links between Layer 2 switches

static default routes

link-state dynamic routing that provides redundant routes

implementing VLANs to contain broadcasts

removing single points of failure with multiple Layer 2 switches

Correct! Wrong!

A small company network has six interconnected Layer 2 switches. Currently all switches are using the default bridge priority value. Which value can be used to configure the bridge priority of one of the switches to ensure that it becomes the root bridge in this design?

28672

34816

32768

61440

Correct! Wrong!

A network administrator has configured an EtherChannel between two switches that are connected via four trunk links. If the physical interface for one of the trunk links changes to a down state, what happens to the EtherChannel?

Spanning Tree Protocol will transition the failed physical interface into forwarding mode.

Spanning Tree Protocol will recalculate the remaining trunk links.

The EtherChannel will transition to a down state.

The EtherChannel will remain functional.

Correct! Wrong!

Which three interface parameters must match for an EtherChannel to form? (Choose three.)

Please select 3 correct answers

trunking mode

EtherChannel mode

spanning-tree state

allowed VLANs

PortFast mode

native VLAN

Correct! Wrong!

Which two channel group modes would place an interface in a negotiating state using PAgP? (Choose two.)

Please select 2 correct answers

desirable

active

passive

auto

Correct! Wrong!

What are three advantages of using EtherChannel technology? (Choose three.)

Please select 3 correct answers

Configuration tasks can be done on the EtherChannel interface.

Load balancing is not needed with EtherChannel.

A spanning tree recalculation is not required when a single link within the channel goes down.

EtherChannel uses multiple logical links to provide redundancy.

The Spanning Tree Protocol shuts down the unused interfaces in the bundle to avoid loops.

There is no need to upgrade links to faster connections to increase bandwidth.

Correct! Wrong!

Which three components are combined to form a bridge ID?

Please select 3 correct answers

bridge priority

port ID

MAC address

cost

extended system ID

IP address

Correct! Wrong!

Which two parameters must match on the ports of two switches to create a PAgP EtherChannel between the switches? (Choose two.)

Please select 2 correct answers

VLAN information

speed

PAgP mode

MAC address

port ID

Correct! Wrong!

Which two concepts relate to a switch port that is intended to have only end devices attached and intended never to be used to connect to another switch? (Choose two.)

Please select 2 correct answers

PVST+

extended system ID

edge port

bridge ID

PortFast

Correct! Wrong!

What is the value used to determine which port on a non-root bridge will become a root port in a STP network?

the lowest MAC address of all the ports in the switch

the path cost

the VTP revision number

the highest MAC address of all the ports in the switch

Correct! Wrong!

Which two protocols are link aggregation protocols? (Choose two.)

Please select 2 correct answers

802.3ad

STP

RSTP

EtherChannel

PAgP

Correct! Wrong!

What are two drawbacks to turning spanning tree off and having multiple paths through the Layer 2 switch network? (Choose two.)

Please select 2 correct answers

The switch acts like a hub.

Port security becomes unstable.

Broadcast frames are transmitted indefinitely.

The MAC address table becomes unstable.

Port security shuts down all of the ports that have attached devices.

Correct! Wrong!

Which statement is true about EtherChannel technology?

EtherChannel uses existing switch ports.

STP does not run on redundant EtherChannel links.

Links must be upgraded to support EtherChannel.

All configuration tasks must be done on the individual ports in the EtherChannel link.

Correct! Wrong!

What is a characteristic of spanning tree?

It is enabled by default on Cisco switches.

It is used to discover information about an adjacent Cisco device.

It prevents propagation of Layer 2 broadcast frames.

It has a TTL mechanism that works at Layer 2.

Correct! Wrong!

Which port state will switch ports immediately transition to when configured for PortFast?

listening

learning

blocking

forwarding

Correct! Wrong!

An EtherChannel link using LACP was formed between two switches, S1 and S2. While verifying the configuration, which mode combination could be utilized on both switches?

S1-on and S2-active

S1-passive and S2-active

S1-on and S2-passive

S1-passive and S2-passive

Correct! Wrong!

When EtherChannel is implemented, multiple physical interfaces are bundled into which type of logical connection?

VLAN interface

interface range

loopback

port channel

Correct! Wrong!

A switch is configured to run STP. What term describes a field that has a default value of 32,768 and is the initial deciding factor when electing a root bridge?

bridge priority

bridge ID

extended system ID

BPDUs

Correct! Wrong!

A network administrator configured an EtherChannel link with three interfaces between two switches. What is the result if one of the three interfaces is down?

The remaining two interfaces continue to load balance traffic.

The remaining two interfaces become separate links between the two switches.

The EtherChannel fails.

One interface becomes an active link for data traffic and the other becomes a backup link.

Correct! Wrong!

What is the function of STP in a scalable network?

It disables redundant paths to eliminate Layer 2 loops.

It decreases the size of the failure domain to contain the impact of failures.

It protects the edge of the enterprise network from malicious activity.

It combines multiple switch trunk links to act as one logical link for increased bandwidth.

Correct! Wrong!

Which STP port role is adopted by a switch port if there is no other port with a lower cost to the root bridge?

alternate

designated port

disabled port

root port

Correct! Wrong!

Which mode configuration setting would allow formation of an EtherChannel link between switches SW1 and SW2 without sending negotiation traffic?

SW1: passive
SW2: active

SW1: desirable
SW2: desirable

SW1: on
SW2: on

SW1: auto
SW2: auto
PortFast enabled on both switches

SW1: auto
SW2: auto
trunking enabled on both switches

Correct! Wrong!

Which statement describes a characteristic of EtherChannel?

It can combine up to a maximum of 4 physical links.

It is made by combining multiple physical links that are seen as one link between two switches.

It can bundle mixed types of 100 Mb/s and 1Gb/s Ethernet links.

It consists of multiple parallel links between a switch and a router.

Correct! Wrong!

What are two load-balancing methods in the EtherChannel technology? (Choose two.)

Please select 2 correct answers

source MAC to destination MAC

source port to destination port

combination of source MAC and IP to destination MAC and IP

source IP to destination IP

combination of source port and IP to destination port and IP

Correct! Wrong!

Which statement describes an EtherChannel implementation?

A trunked port can be part of an EtherChannel bundle.

EtherChannel can support up to a maximum of ten separate links.

EtherChannel operates only at Layer 2.

PAgP cannot be used in conjunction with EtherChannel.

Correct! Wrong!

What additional information is contained in the 12-bit extended system ID of a BPDU?

MAC address

port ID

IP address

VLAN ID

Correct! Wrong!

What is an accurate description of redundancy?

designing a network to use multiple paths between switches to ensure there is no single point of failure

configuring a router with a complete MAC address database to ensure that all frames can be forwarded to the correct destination

designing a network to use multiple virtual devices to ensure that all traffic uses the best path through the internetwork

configuring a switch with proper security to ensure that all traffic forwarded through an interface is filtered

Correct! Wrong!

Which statement is true regarding the use of PAgP to create EtherChannels?

It is Cisco proprietary.

It requires full duplex.

It mandates that an even number of ports (2, 4, 6, etc.) be used for aggregation.

It requires more physical links than LACP does.

It increases the number of ports that are participating in spanning tree.

Correct! Wrong!

A switch is configured to run STP. What term describes the switch port closest, in terms of overall cost, to the root bridge?

disabled

alternate port

root port

designated port

Correct! Wrong!

During the implementation of Spanning Tree Protocol, all switches are rebooted by the network administrator. What is the first step of the spanning-tree election process?

All the switches send out BPDUs advertising themselves as the root bridge.

Each switch determines the best path to forward traffic.

Each switch determines what port to block to prevent a loop from occurring.

Each switch with a lower root ID than its neighbor will not send BPDUs.

Correct! Wrong!

If no bridge priority is configured in PVST, which criteria is considered when electing the root bridge?

lowest MAC address

highest MAC address

highest IP address

lowest IP address

Correct! Wrong!

What value determines the root bridge when all switches connected by trunk links have default STP configurations?

MAC address

extended system ID

VLAN ID

bridge priority

Correct! Wrong!

A switch is configured to run STP. What term describes the reference point for all path calculations?

designated port

alternate port

root port

root bridge

Correct! Wrong!

What is a requirement to configure a trunking EtherChannel between two switches?

The participating interfaces must be assigned the same VLAN number on both switches.

The participating interfaces must be physically contiguous on a switch.

The allowed range of VLANs must be the same on both switches.

Correct! Wrong!

An administrator is troubleshooting a switch and wants to verify if it is a root bridge. What command can be used to do this?

show startup-config

show vlan

show running-config

show spanning-tree

Correct! Wrong!

What will happen if a network administrator puts a port that is part of an EtherChannel bundle into a different VLAN than the other ports in that bundle?

The EtherChannel bundle will stay up if either PAgP or LACP is used.

The EtherChannel bundle will stay up only if LACP is used.

The EtherChannel bundle will stay up if the ports were configured with no negotiation between the switches to form the EtherChannel.

The EtherChannel will fail.

The EtherChannel bundle will stay up only if PAgP is used.

Correct! Wrong!

A network administrator is configuring an EtherChannel link between switches SW1 and SW2 by using the command SW1(config-if-range)# channel-group 1 mode auto . Which command must be used on SW2 to enable this EtherChannel?

SW2(config-if-range)# channel-group 1 mode passive

SW2(config-if-range)# channel-group 1 mode desirable

SW2(config-if-range)# channel-group 1 mode active

SW2(config-if-range)# channel-group 1 mode on

Correct! Wrong!

What are two advantages of EtherChannel? (Choose two.)

Please select 2 correct answers

Spanning Tree Protocol views the physical links in an EtherChannel as one logical connection.

EtherChannel uses upgraded physical links to provide increased bandwidth.

Spanning Tree Protocol ensures redundancy by transitioning failed interfaces in an EtherChannel to a forwarding state.

Load balancing occurs between links configured as different EtherChannels.

Configuring the EtherChannel interface provides consistency in the configuration of the physical links.

Correct! Wrong!

Which RSTP ports are connected to end devices?

designated ports

trunk ports

edge ports

root ports

Correct! Wrong!

What is the outcome of a Layer 2 broadcast storm?

New traffic is discarded by the switch because it is unable to be processed.

CSMA/CD will cause each host to continue transmitting frames.

ARP broadcast requests are returned to the transmitting host.

Routers will take over the forwarding of frames as switches become congested.

Correct! Wrong!

When the show spanning-tree vlan 33 command is issued on a switch, three ports are shown in the forwarding state. In which two port roles could these interfaces function while in the forwarding state? (Choose two.)

Please select 2 correct answers

alternate

disabled

blocked

designated

root

Correct! Wrong!

When a range of ports is being configured for EtherChannel by the use of PAgP, which mode will form the bundled channel only if the port receives PAgP packets from another device?

active

desirable

auto

passive

Correct! Wrong!

Which technology is an open protocol standard that allows switches to automatically bundle physical ports into a single logical link?

DTP

PAgP

Multilink PPP

LACP

Correct! Wrong!

When PVST is running over a switched network, which port state can participate in BPDU frame forwarding based on BPDUs received, but does not forward data frames?

disabled

blocking

forwarding

listening

Correct! Wrong!

Which two statements describe a switch port that is configured with PortFast? (Choose two.)

Please select 2 correct answers

The switch port sends DHCP requests before transitioning to the forwarding state.

The switch port immediately transitions from blocking to the forwarding state.

The switch port immediately transitions from the listening to the forwarding state.

The switch port should never receive BPDUs.

The switch port immediately processes any BPDUs before transitioning to the forwarding state.

Correct! Wrong!

A network administrator is configuring an EtherChannel link between two physical ports on a switch. Which statement describes the result when one of the physical ports fails?

The EtherChannel stops transmitting data until it is restarted.

The EtherChannel continues transmitting data with reduced bandwidth.

The EtherChannel link fails.

An STP recalculation is needed.

Correct! Wrong!

When a range of ports is being configured for EtherChannel, which mode will configure LACP on a port only if the port receives LACP packets from another device?

passive

desirable

active

auto

Correct! Wrong!

After the election of the root bridge has been completed, how will switches find the best paths to the root bridge?

Each switch will analyze the sum of all port costs to reach the root and use the path with the lowest cost.

Each switch will analyze the BID of all neighbors to reach the root and use the path through the lowest BID neighbors.

Each switch will analyze the sum of the hops to reach the root and use the path with the fewest hops.

Each switch will analyze the port states of all neighbors and use the designated ports to forward traffic to the root.

Correct! Wrong!

Which three port states are used by Rapid PVST+? (Choose three.)

Please select 3 correct answers

listening

discarding

forwarding

learning

blocking

trunking

Correct! Wrong!

A switch is configured to run STP. What term describes a non-root port that is permitted to forward traffic on the network?

root port

designated port

alternate port

disabled

Correct! Wrong!

SRWE | Modules 5 – 6

Final Score

Congratulations, you have completed the CCNA2 v7 – SRWE – Modules 5 – 6! Tell us your rating!

CCNA3 v7 ENSA | Final Exam Answers

CCNA3 v7 ENSA | Modules 13 – 14 Exam Answers

CCNA3 v7 ENSA | Modules 9 – 12 Exam Answers

CCNA2 v7 SRWE | Modules 5 – 6 Exam Answers

CCNA2 v7 Modules 5 - 6 Exam Answers

CCNA2 v7 Redundant Networks Exam Answers

Which port role is assigned to the switch port that has the lowest cost to reach the root bridge?

A set of switches is being connected in a LAN topology. Which STP bridge priority value will make it least likely for the switch to be selected as the root?

What are two requirements to be able to configure an EtherChannel between two switches? (Choose two.)

When EtherChannel is configured, which mode will force an interface into a port channel without exchanging aggregation protocol packets?

In which two PVST+ port states are MAC addresses learned? (Choose two.)

In which two port states does a switch learn MAC addresses and process BPDUs in a PVST network? (Choose two.)

When a range of ports is being configured for EtherChannel, which mode will configure PAgP so that it initiates the EtherChannel negotiation?

When a range of ports is being configured for EtherChannel, which mode will configure LACP so that it initiates the EtherChannel negotiation?

Which spanning tree standard supports only one root bridge so that traffic from all VLANs flows over the same path?

What are two advantages of using LACP? (Choose two.)

A switch is configured to run STP. What term describes a field used to specify a VLAN ID?

Which two load balancing methods can be implemented with EtherChannel technology? (Choose two.)

Which function is provided by EtherChannel?

Which two mode combinations would result in the successful negotiation of an EtherChannel? (Choose two.)

What is the purpose of the Spanning Tree Protocol (STP)?

Which protocol provides up to 16 instances of RSTP, combines many VLANs with the same physical and logical topology into a common RSTP instance, and provides support for PortFast, BPDU guard, BPDU filter, root guard, and loop guard?

Which two network design features require Spanning Tree Protocol (STP) to ensure correct network operation? (Choose two.)

A small company network has six interconnected Layer 2 switches. Currently all switches are using the default bridge priority value. Which value can be used to configure the bridge priority of one of the switches to ensure that it becomes the root bridge in this design?

A network administrator has configured an EtherChannel between two switches that are connected via four trunk links. If the physical interface for one of the trunk links changes to a down state, what happens to the EtherChannel?

Which three interface parameters must match for an EtherChannel to form? (Choose three.)

Which two channel group modes would place an interface in a negotiating state using PAgP? (Choose two.)

What are three advantages of using EtherChannel technology? (Choose three.)

Which three components are combined to form a bridge ID?

Which two parameters must match on the ports of two switches to create a PAgP EtherChannel between the switches? (Choose two.)

Which two concepts relate to a switch port that is intended to have only end devices attached and intended never to be used to connect to another switch? (Choose two.)

What is the value used to determine which port on a non-root bridge will become a root port in a STP network?

Which two protocols are link aggregation protocols? (Choose two.)

What are two drawbacks to turning spanning tree off and having multiple paths through the Layer 2 switch network? (Choose two.)

Which statement is true about EtherChannel technology?

What is a characteristic of spanning tree?

Which port state will switch ports immediately transition to when configured for PortFast?

An EtherChannel link using LACP was formed between two switches, S1 and S2. While verifying the configuration, which mode combination could be utilized on both switches?​

When EtherChannel is implemented, multiple physical interfaces are bundled into which type of logical connection?

A switch is configured to run STP. What term describes a field that has a default value of 32,768 and is the initial deciding factor when electing a root bridge?

A network administrator configured an EtherChannel link with three interfaces between two switches. What is the result if one of the three interfaces is down?

What is the function of STP in a scalable network?

Which STP port role is adopted by a switch port if there is no other port with a lower cost to the root bridge?

Which mode configuration setting would allow formation of an EtherChannel link between switches SW1 and SW2 without sending negotiation traffic?

Which statement describes a characteristic of EtherChannel?

What are two load-balancing methods in the EtherChannel technology? (Choose two.)

Which statement describes an EtherChannel implementation?

What additional information is contained in the 12-bit extended system ID of a BPDU?

What is an accurate description of redundancy?

Which statement is true regarding the use of PAgP to create EtherChannels?

A switch is configured to run STP. What term describes the switch port closest, in terms of overall cost, to the root bridge?

During the implementation of Spanning Tree Protocol, all switches are rebooted by the network administrator. What is the first step of the spanning-tree election process?

If no bridge priority is configured in PVST, which criteria is considered when electing the root bridge?

What value determines the root bridge when all switches connected by trunk links have default STP configurations?

A switch is configured to run STP. What term describes the reference point for all path calculations?

What is a requirement to configure a trunking EtherChannel between two switches?

An administrator is troubleshooting a switch and wants to verify if it is a root bridge. What command can be used to do this?

What will happen if a network administrator puts a port that is part of an EtherChannel bundle into a different VLAN than the other ports in that bundle?

A network administrator is configuring an EtherChannel link between switches SW1 and SW2 by using the command SW1(config-if-range)# channel-group 1 mode auto . Which command must be used on SW2 to enable this EtherChannel?

What are two advantages of EtherChannel? (Choose two.)

Which RSTP ports are connected to end devices?

What is the outcome of a Layer 2 broadcast storm?

When the show spanning-tree vlan 33 command is issued on a switch, three ports are shown in the forwarding state. In which two port roles could these interfaces function while in the forwarding state? (Choose two.)

When a range of ports is being configured for EtherChannel by the use of PAgP, which mode will form the bundled channel only if the port receives PAgP packets from another device?

Which technology is an open protocol standard that allows switches to automatically bundle physical ports into a single logical link?

When PVST is running over a switched network, which port state can participate in BPDU frame forwarding based on BPDUs received, but does not forward data frames?

Which two statements describe a switch port that is configured with PortFast? (Choose two.)

A network administrator is configuring an EtherChannel link between two physical ports on a switch. Which statement describes the result when one of the physical ports fails?

When a range of ports is being configured for EtherChannel, which mode will configure LACP on a port only if the port receives LACP packets from another device?

After the election of the root bridge has been completed, how will switches find the best paths to the root bridge?

Which three port states are used by Rapid PVST+? (Choose three.)

A switch is configured to run STP. What term describes a non-root port that is permitted to forward traffic on the network?

CCNA3 v7 ENSA | Final Exam Answers

CCNA3 v7 ENSA | Modules 13 – 14 Exam Answers

CCNA3 v7 ENSA | Modules 9 – 12 Exam Answers

Subscribe

An EtherChannel link using LACP was formed between two switches, S1 and S2. While verifying the configuration, which mode combination could be utilized on both switches?