fbpx
CCNA2 v7 SRWE Modules 1 4 Exam Answers
CCNA2 v7 SRWE Modules 1 4 Exam Answers

CCNA2 v7 SRWE | Modules 1 – 4 Exam Answers

CCNA2 v7 Modules 1 - 4 Exam Answers
5

Summary

Check answers here: CCNA2 v7 SRWE Modules 1 – 4: Switching Concepts, VLANs, and InterVLAN Routing Exam Answers. CCNA 200-301 Passed 100% !!

This exam will cover material from Modules 1- 4 of the CCNA2 Switching, Routing, and Wireless Essentials v7.0 (SRWE) curriculum. This exam will be scored using the Weighted Model where each MCSA (Multiple-Choice Single-Answer) is worth two points and each MCMA (Multiple-Choice Multiple-Answer) is worth one point for each correct option. Other tasks types such as fill-in-the-blank, drag and drop (matching) and Packet Tracer items may be included in this exam. For Packet Tracer tasks, you must have the latest version of Packet Tracer installed on your machine.

This exam will cover material from Modules 1 – 4 of the CCNA2 Switching, Routing, and Wireless Essentials v7.0 (SRWE) curriculum.

This exam will be scored using the Weighted Model where each MCSA (Multiple-Choice Single-Answer) is worth two points and each MCMA (Multiple-Choice Multiple-Answer) is worth one point for each correct option. If more options are selected than required, the student will receive a score of zero.

CCNA2 v7 Switching Concepts, VLANs, and InterVLAN Routing Exam Answers

What is a disadvantage of using multilayer switches for inter-VLAN routing?

Correct! Wrong!

Which command displays information about the auto-MDIX setting for a specific interface?​

Correct! Wrong!

What type of VLAN is designed to have a delay of less than 150 ms across the network?

Correct! Wrong!

What type of Ethernet cable would be used to connect one switch to another switch when neither switch supports the auto-MDIX feature?

Correct! Wrong!

Which switching method ensures that the incoming frame is error-free before forwarding?

Correct! Wrong!

In which location are the normal range VLANs stored on a Cisco switch by default?

Correct! Wrong!

Which distinct type of VLAN is used by an administrator to access and configure a switch?

Correct! Wrong!

A network administrator has configured ​VLAN 99 as the management VLAN and has configured it with an IP address and subnet mask. The administrator issues the show interface vlan 99 command and notices that the line protocol is down. Which action can change the state of the line protocol to up?

Correct! Wrong!

What is required to perform router-on-a-stick inter-VLAN routing?

Correct! Wrong!

What is the purpose of setting the native VLAN separate from data VLANs?

Correct! Wrong!

A Cisco switch currently allows traffic tagged with VLANs 10 and 20 across trunk port Fa0/5. What is the effect of issuing a switchport trunk allowed vlan 30 command on Fa0/5?

Correct! Wrong!

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# mdix auto command?

Correct! Wrong!

What type of VLAN is configured specifically for network traffic such as SSH, Telnet, HTTPS, HHTP, and SNMP?

Correct! Wrong!

Port Fa0/11 on a switch is assigned to VLAN 30. If the command no switchport access vlan 30 is entered on the Fa0/11 interface, what will happen?

Correct! Wrong!

What will a Cisco LAN switch do if it receives an incoming frame and the destination MAC address is not listed in the MAC address table?

Correct! Wrong!

If an organization is changing to include Cisco IP phones in its network, what design feature must be considered to ensure voice quality?

Correct! Wrong!

Which information does a switch use to keep the MAC address table information current?

Correct! Wrong!

After which step of the switch bootup sequence is the boot loader executed?

Correct! Wrong!

If one end of an Ethernet connection is configured for full duplex and the other end of the connection is configured for half duplex, where would late collisions be observed?

Correct! Wrong!

When configuring a router as part of a router-on-a-stick inter-VLAN routing topology, where should the IP address be assigned?

Correct! Wrong!

What is the significant difference between a hub and a Layer 2 LAN switch?

Correct! Wrong!

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# ip address 172.18.33.88 255.255.255.0 command?

Correct! Wrong!

Which network device can serve as a boundary to divide a Layer 2 broadcast domain?

Correct! Wrong!

What is the minimum Ethernet frame size that will not be discarded by the receiver as a runt frame?

Correct! Wrong!

Which sentence correctly describes the SVI inter-VLAN routing method?

Correct! Wrong!

Which solution would help a college alleviate network congestion due to collisions?

Correct! Wrong!

A small college uses VLAN 10 for the classroom network and VLAN 20 for the office network. What is needed to enable communication between these two VLANs while using legacy inter-VLAN routing?

Correct! Wrong!

When a Cisco switch receives untagged frames on a 802.1Q trunk port, which VLAN ID is the traffic switched to by default?

Correct! Wrong!

Which switch component reduces the amount of packet handling time inside the switch?

Correct! Wrong!

Which type of inter-VLAN communication design requires the configuration of multiple subinterfaces?

Correct! Wrong!

Which command will provide information about the status of all interfaces including the number of giants, runts, and collisions on the interface?

Correct! Wrong!

Which type of address does a switch use to build the MAC address table?

Correct! Wrong!

Which four steps are needed to configure a voice VLAN on a switch port? (Choose four).

Please select 4 correct answers

Correct! Wrong!

Which two characteristics describe the native VLAN? (Choose two.)

Please select 2 correct answers

Correct! Wrong!

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# ipv6 address 2001:db8:a2b4:88::1/64 command?

Correct! Wrong!

What are three primary benefits of using VLANs? (Choose three.)

Please select 3 correct answers

Correct! Wrong!

Which command is used to set the BOOT environment variable that defines where to find the IOS image file on a switch?

Correct! Wrong!

What is the significant difference between a hub and a Layer 2 LAN switch?

Correct! Wrong!

Which type of VLAN is used to designate which traffic is untagged when crossing a trunk port?

Correct! Wrong!

What is a disadvantage of using router-on-a-stick inter-VLAN routing?

Correct! Wrong!

Which impact does adding a Layer 2 switch have on a network?

Correct! Wrong!

What is the purpose of frame buffers on a switch?

Correct! Wrong!

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# shutdown command?

Correct! Wrong!

What type of VLAN supports untagged traffic?

Correct! Wrong!

What type of VLAN is used to separate the network into groups of users or devices?

Correct! Wrong!

Which two statements are true about half-duplex and full-duplex communications? (Choose two.)

Please select 2 correct answers

Correct! Wrong!

What is a characteristic of a routed port on a Layer 3 switch?

Correct! Wrong!

Which statement is true about broadcast and collision domains?

Correct! Wrong!

Which router bootup sequence is correct?​

Correct! Wrong!

Which option correctly describes a switching method?

Correct! Wrong!

A PC is to access a web server on another network. Which inter-VLAN method will provide the highest bandwidth at Layer 3 and also provide a default gateway for the PC?

Correct! Wrong!

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# exit command?

Correct! Wrong!

What type of VLAN is initially the management VLAN?

Correct! Wrong!

A high school uses VLAN15 for the laboratory network and VLAN30 for the faculty network. What is required to enable communication between these two VLANs while using the router-on-a-stick approach?

Correct! Wrong!

An administrator is investigating a failure on a trunk link between a Cisco switch and a switch from another vendor. After a few show commands, the administrator notices that the the switches are not negotiating a trunk. What is a probable cause for this issue?

Correct! Wrong!

What happens to a port that is associated with VLAN 10 when the administrator deletes VLAN 10 from the switch?

Correct! Wrong!

Under which two occasions should an administrator disable DTP while managing a local area network? (Choose two.)

Please select 2 correct answers

Correct! Wrong!

What is the first action in the boot sequence when a switch is powered on?

Correct! Wrong!

Which two statements are correct with respect to SVI inter-VLAN routing? (Choose two.)

Please select 2 correct answers

Correct! Wrong!

What advantage does SSH offer over Telnet?

Correct! Wrong!

Which characteristic describes cut-through switching?

Correct! Wrong!

A network administrator enters the following command sequence on a Cisco 3560 switch. What is the purpose of these commands?

Correct! Wrong!

Which tasks can be accomplished by using the command history feature? (Choose two.)

Please select 2 correct answers

Correct! Wrong!

A network contains multiple VLANs spanning multiple switches. What happens when a device in VLAN 20 sends a broadcast Ethernet frame?

Correct! Wrong!

What type of VLAN is designed to reserve bandwidth to ensure IP Phone quality?

Correct! Wrong!

An administrator was troubleshooting a router-on-a-stick topology and concluded that the problem was related to the configuration of VLANs on the router subinterfaces. Which two commands can the administrator use in the router to identify the problem? (Choose two.)

Correct! Wrong!

Which switch characteristic helps alleviate network congestion when a 10 Gbps port is forwarding data to a 1 Gbps port?

Correct! Wrong!

Which protocol adds security to remote connections?

Correct! Wrong!

Which statement describes the system LED operation on Cisco Catalyst switches?

Correct! Wrong!

Where is the vlan.dat file stored on a switch?

Correct! Wrong!

A network administrator is determining the best placement of VLAN trunk links. Which two types of point-to-point connections utilize VLAN trunking?​ (Choose two.)

Please select 2 correct answers

Correct! Wrong!

What is the meaning of the number 10 in the encapsulation dot1Q 10 native router subinterface command?​

Correct! Wrong!

Which network device can be used to eliminate collisions on an Ethernet network?

Correct! Wrong!

What type of VLAN should not carry voice and network management traffic?

Correct! Wrong!

While configuring inter-VLAN routing on a multilayer switch, a network administrator issues the no switchport command on an interface that is connected to another switch. What is the purpose of this command?

Correct! Wrong!

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw# configure terminal command?

Correct! Wrong!

Which statement is correct about Ethernet switch frame forwarding decisions?

Correct! Wrong!

Which prompt is displayed when a network administrator successfully accesses the boot loader on a switch to recover from a system crash?

Correct! Wrong!

What is the purpose of the vlan.dat file on a switch?

Correct! Wrong!

On a switch that is configured with multiple VLANs, which command will remove only VLAN 100 from the switch?

Correct! Wrong!

On a Cisco switch, where is extended range VLAN information stored?

Correct! Wrong!

Which statement describes SVIs?

Correct! Wrong!

When routing a large number of VLANs, what are two disadvantages of using the router-on-a-stick inter-VLAN routing method rather than the multilayer switch inter-VLAN routing method? (Choose two.)

Please select 2 correct answers

Correct! Wrong!

An administrator issues the command confreg 0x2142 at the rommon 1> prompt. What is the effect when this router is rebooted?

Correct! Wrong!

Which scalable method must be implemented in order to provide inter-VLAN routing on a switched network with more than 1000 VLANs?

Correct! Wrong!

How do switch buffers affect network performance?

Correct! Wrong!

Which switch characteristic helps keep traffic local and alleviates network congestion?

Correct! Wrong!

In which memory location are the VLAN configurations of normal range VLANs stored on a Catalyst switch?

Correct! Wrong!

What is one function of a Layer 2 switch?

Correct! Wrong!

How is traffic routed between multiple VLANs on a multilayer switch?

Correct! Wrong!

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# duplex full command?

Correct! Wrong!

What does the term “port density” represent for an Ethernet switch?

Correct! Wrong!

Which command displays the encapsulation type, the voice VLAN ID, and the access mode VLAN for the Fa0/1 interface?

Correct! Wrong!

What must an administrator have in order to reset a lost password on a router?

Correct! Wrong!

Which switching method makes use of the FCS value?

Correct! Wrong!

What does a switch use to locate and load the IOS image?

Correct! Wrong!

A network administrator issues the show vlan brief command while troubleshooting a user support ticket. What output will be displayed?

Correct! Wrong!

When configuring a switch for SSH access, what other command that is associated with the login local command is required to be entered on the switch?

Correct! Wrong!

What is a characteristic of an IPv4 loopback interface on a Cisco IOS router?​

Correct! Wrong!

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw> enable command?

Correct! Wrong!

What happens to switch ports after the VLAN to which they are assigned is deleted?

Correct! Wrong!

What operational mode should be used on a switch port to connect it to a router for router-on-a-stick inter-VLAN routing?

Correct! Wrong!

What information is added to the switch table from incoming frames?

Correct! Wrong!

SRWE | Modules 1 – 4
Final Score

Congratulations, you have completed the CCNA2 v7 – SRWE – Modules 1 – 4! Tell us your rating!

Share your Results: